01 / Project description
Project description
The illustrative system is installed on an industrial roof. The review creates structured RGB and thermal material and identifies modules for service verification.
Demonstration scenario — not a client projectMATRICE 4T · ENERGY
Solar installation inspection
A complete example of a thermal review of a 420 kWp rooftop installation.
Demonstration report ↓02 / Objective
Objective
Identify illustrative thermal anomalies and provide service teams with a clear location list for further diagnostics.
Scope
- Review of module layout and roof zones
- Thermal flight under agreed operating conditions
- Context RGB imagery
- Observations indexed by row and section
Delivery plan
- Confirm operating status and weather
- Grid flight above all sections
- Repeat views of observed anomalies
- Completeness check for RGB and thermal material
Delivered material
- Section and observation map
- Thermal images with matching RGB frames
- Observation register
- Demonstration report for further verification
Outcome
- Three illustrative thermal points identified
- Module list for service checks
- Comparison material for a future review
AERONAUTIQ · DEMO REPORT
Demonstration report
This report demonstrates how material can be structured. The data, location and observations are illustrative.
| ID | Area | Material | Status | Description |
|---|---|---|---|---|
| PV-01 | Section A / row 04 | RGB + thermal | Verify | Local temperature difference on one module. |
| PV-02 | Section B / row 11 | RGB + thermal | Verify | Uneven temperature distribution across a module. |
| PV-03 | Section C / row 03 | Thermal | Observe | Difference from adjacent modules; electrical comparison recommended. |
| PV-04 | Service routes | RGB | No issue | Context imagery and access-route documentation. |
AERONAUTIQ DRONE SOLUTIONS